Select your language

Daikin Air-Conditioning Error E6

error e6 air conditioning daikin

What does the failure of the E6 error affecting your Daikin air conditioner mean?

Is the E6 error code on your Daikin air conditioner making you sweat at home? Well, you don't have to worry because today we bring you the solution to this problem. So keep reading and stay with us, in this article we will talk about the causes of this problem and we will also tell you what solutions you can apply to achieve a definitive solution.

The E6 error code on Daikin air conditioners indicates a communication problem between the indoor unit and the outdoor unit. A failure that can be somewhat complicated to solve but can be repairable, so don't panic and let's see what we can do to fix this problem.

The first thing we need to know are the possible causes that can cause an E6 error code on our Daikin air conditioner:

  • A communication failure between the indoor unit and the outdoor unit: This may be due to damaged or defective wiring, loose or dirty connections, or one of the PCB electronic cards of the indoor or outdoor unit has been damaged.
  • An electrical interference in any of the units, both indoor and outdoor: There may be electrical noise in the supply, very strong electrical discharges, or voltage spikes.
  • Problems with the power supply: A failure in the power supply of the indoor or outdoor unit may cause the E6 error code to appear on your Daikin air conditioner.
  • A failure in the temperature sensor: Although very rare, it may be that the temperature sensor of the indoor or outdoor unit is the cause of this problem, perhaps it is very dirty or has been completely damaged.

All of these are the causes that cause an E6 error code in Daikin brand air conditioners. But now let's see the solutions we can apply to solve this problem without any inconvenience.

How can you solve the E6 error failure in your Daikin air conditioner?

We have prepared for you a list of possible solutions to fix the E6 error code on Daikin air conditioners. Please follow all the steps carefully and do not skip any, as they are all important:

  1. Turn off and unplug the air conditioner from the power source to reset its sensors: We can start with the easiest and simplest, which would be to apply a reset to the air conditioner. To do this, you need to turn off the air conditioner and unplug it from the power source for a few minutes. Once the time has passed, reconnect the equipment and turn it on to check if the E6 error code has disappeared.
  2. Check the electrical wiring connecting the indoor and outdoor units of your air conditioner: This wiring must be in very good working condition. Visually inspect all this wiring and look for damage or defects if any. Make sure that no wires are broken, cut, burned, disconnected, or scorched. If you find wires in poor condition, you will need to replace them with new ones or make the necessary repairs.
  3. Verify the wiring connections in the indoor and outdoor units of your air conditioner: These connections must be in very good working condition. Check and make sure that all connections are securely tightened and free from dirt or dust that may affect contact. It often happens that these connections become sulfated due to the moisture generated by the air conditioner itself, in which case we recommend applying electronic cleaner on the contacts and using a brush to clean well to remove all the sulfate that has accumulated.
  4. If the problem persists, please repeat all the previous steps and make sure to follow everything to the letter: If the above solutions do not work, there may be a problem with the PCB electronic cards of one of the units, the power supply, or the temperature sensor. In that case, you would need to do a very thorough inspection and have extensive knowledge in electronics, as well as have the right tools to carry out this inspection. If you think this could be your case, then we recommend contacting an authorized Daikin service technician.
  5. Call a Daikin technical service and request a home visit for a more thorough inspection: A qualified Daikin technician can diagnose the problem accurately and solve it efficiently. We invite you to call Daikin technical support, we are confident that they will give you a quick and effective solution to this problem.

In conclusion, what we know is that the E6 error code in Daikin air conditioners can be a communication failure between the indoor and outdoor units of the device. So, to stop feeling hot and start cooling your space, you can try to fix it yourself by following the steps described in this article. If you are not successful or feel that it is more difficult than expected, you can contact an authorized Daikin service technician for assistance.

Tips to prevent the E6 error code in your Daikin air conditioner

  • Perform preventive maintenance on your air conditioner regularly.
  • Protect the equipment from electrical overloads with a good voltage regulator or a surge protector.
  • Install a line filter to avoid electrical interference or make sure your air conditioner is properly grounded.
  • Do not use the air conditioner in extreme weather conditions.

And that's all for today! We hope we have been able to help you fix the E6 error code on your Daikin air conditioner and that you don't encounter too many difficulties when making these repairs. Good luck and see you later!

¿Te ha servido este artículo? Por favor déjanos tu Voto