Aeg Induction plaque Error e9

What is the fault of the e9 Aeg error that is affecting your induction hob?

Have you ever experienced the error code e9 on your AEG induction hob? If so, don't worry, you are not the only one who has experienced this problem. This is common when using these modern appliances. While the e9 error on AEG induction plaque can be frustrating, there are easy and simple solutions that you can apply to find a solution.

Today, I will explain what the e9 error code on AEG induction hobs is, its possible causes, and give you some useful tips to solve the problem.

The e9 error code on AEG induction hobs appears on the screen and can be due to a problem in the circuit board. Although it may seem serious, the truth is that even a simple restart could solve the problem. Let's find out!

• Defective electronic circuits: This is the most common cause of the e9 error on AEG induction hobs. The electronic circuits are delayed or damaged.
• Switch failure: When the switches fail, this can cause the e9 error code on your AEG induction hob.
• The energy counter is mis-registered: This may be due to a malfunction of the energy counter, so the e9 error code may appear on the screen.
• Failure of the printed circuit board (PCB) socket: This is due to the malfunction of the socket and can be caused by a power supply failure.
• Problem in the control unit or PCB: A defective control unit can lead to errors in your precious appliance.

How to fix the Aeg induction hob e9 error?

We will show you some possible solutions that you can try before contacting AEG technical support:

1. Restart the induction hob: Turn off the induction hob, wait for a minute, and then turn it back on. This solution is useful for deactivating the e9 error on an AEG induction hob.
2. Check the cables and plug: Make sure the cables and plug are in perfect condition and well connected on your AEG induction hob.
3. Check the switches: Verify that the switches are fully activated. It may seem obvious, but a poorly pressed or stuck switch can negatively affect the operation of your appliance.
4. Check the electronic circuits: If you know electronics, you can check the internal circuits of the induction hob for any damage. You can do this with a cable tester, and you will need to uncover your induction hob.
5. Check the energy counter: Check if the energy counter is working correctly. Otherwise, try restarting the hob. If it doesn't work, you will need to replace it.
6. In extreme cases, you can replace the printed circuit board or the control unit: It is likely that you will need to rely on a qualified technician for this procedure due to the complexity of this repair.
7. Repeat all non-invasive steps: If the problem persists, you can repeat each of the above-mentioned steps that you believe you can perform easily.
8. Contact a qualified AEG technician: If the problem persists, contact a qualified AEG technician to resolve this e9 error code on your AEG induction hob.