Baxiroca Boiler Error e10

What is the E10 Baxiroca error affecting your boiler?

Baxiroca brand boilers can sometimes display a E10 error code on their screen, which can hinder their proper functioning. If you own this type of boiler, then you're in the right place to understand the causes of this error code and how you might resolve it.

This E10 error code on your Baxiroca boiler indicates that there's a problem with the external sensor, a probe that measures the temperature of the water entering the boiler. If you were wondering whether this issue can affect your Baxiroca Victoria 24/24F boiler or the Baxiroca Novanox 24/24F boiler, the answer is yes.

If this sensor isn't functioning properly, it can cause the boiler not to turn on, turn off unexpectedly, or not regulate the temperature properly. This fault in your boiler can be due to several reasons, such as:

• The external sensor is defective or damaged.
• The external sensor is improperly connected or has loose cables.
• The external sensor is dirty or has deposits of lime or other substances affecting its reading.
• The external sensor is exposed to extreme weather conditions, like frost or high temperatures.

How to fix the E10 error of the Baxiroca boiler?

Luckily for you, this issue can be fixed, and there's no need to replace your boiler entirely. Let's delve into potential solutions to rectify this error code and get your device running again:

1. Restart the boiler: We'll start with the easiest solution. Restart the boiler to reset and recalibrate the sensors. Turn off your boiler entirely, unplug it from the power source, wait a few minutes, then reconnect. Turn on your boiler and see if the error has cleared.
2. Check the external sensor: Locate this sensor and inspect it. Ensure it isn’t broken, cracked, or burnt. If you notice any signs of wear or malfunction, you'll need to replace it with a new one. If you have a multimeter and know how to use it, this would be a good time to check the sensor's continuity.
3. Inspect the sensor's connections: Ensure the sensor cables are properly connected to the boiler and aren’t damaged or worn out. If they're loose, secure them gently. If they're damaged, replace them with new ones.
4. Clean the external sensor: It wouldn’t hurt to perform some preventative maintenance on this sensor. Avoid using water! Instead, use an electronic cleaner designed for cleaning electronic components. Spray a bit of the cleaner and wait 1 to 2 minutes for it to evaporate completely.
5. Protect the external sensor: Keep the sensor from being exposed to adverse weather conditions like rain, snow, direct sunlight, or extreme temperatures. Position the sensor in a sheltered spot isolated from the elements.
6. Repeat all the previous steps if the issue persists: If the E10 error code still appears on your boiler after executing all these actions, there might be another malfunction. To be sure, repeat all the steps, ensuring you follow every instruction to the letter. If the problem still persists, it's time to leave it to the experts.
7. Contact Baxiroca technical support: If you couldn't resolve the E10 error code on your own, better call Baxiroca's technical support. We're confident these trained professionals specializing in this type of boiler will help you address the issue promptly and safely.

In summary, the E10 error code on Baxiroca boilers arises due to a reading issue with the external probe. To fix this problem, you should:

• Restart your boiler to reset and recalibrate the sensors
• Inspect the external sensor
• Clean and maintain the external sensor
• Check the sensor's connections
• Protect the external sensor from harsh weather conditions
• Repeat the steps above if the issue persists
• Contact Baxiroca technical support if you couldn't rectify the problem

We hope this article has helped you understand and solve the E10 error code on your Baxiroca boiler. These boilers are of excellent quality, but every now and then, they'll need some TLC to function correctly. See you next time!