AEG Dishwasher Errors

You will find a complete list of error codes that appear on your AEG dishwasher. Error codes are one of the easiest ways to find the origin and solution to the various problems that these machines may have. Please note that the error code may vary depending on the model of your AEG dishwasher.

Explanation of the most common errors in AEG dishwashers

In the following list we explain the problem in brief detail. The steps to solve are within each article:

Error 20

There has been a problem with the water supply as it is too low.

Error 30

We have a problem with water exchange, although it could also be an error that indicates other types of problems.

Error 50

It is very possible that a short circuit has occurred in the electrical circuit. That is to say, some electrical part is defective.

Error C2

This error occurs when we have an excess amount of water but there is something that prevents the release of this amount of water.

Error C3

We have a problem with the water supply and the root of the problem can be varied.

Error E10

There are generic problems with water that can be very varied.

Error E21

This error indicates an accumulation of water because it has not been able to escape through the drain pipe.

Error E60

The water has not been pumped well, so there is a problem with the pump. Although it could also be some other defective part.

Error i20

It is established that there is a problem with the water discharge that needs to be done after the wash cycle.

Error i40

Drainage failures where there are different causes and various solutions.