Aeg Dishwasher Error i40

What is the fault of the i40 Aeg error that is affecting your dishwasher?

Do you have a problem with your AEG dishwasher? The i40 error message may be behind it. Don't stress out over this issue, as there are many things you can do to fix this error on your appliance. Let's take a look at the problem and what can be done to solve it.

The i40 error typically appears on the LCD display of AEG dishwashers as part of an exclamation mark. It's a sign that there is a technical anomaly with your dishwasher. You have to keep in mind that the i40 error is quite similar to the e40 error that can appear on your AEG dishwasher error code. So the causes and solutions to make both errors apply in the same way, keep reading the article and find out how you can make this error code disappear.

There are several things that can cause the i40 error. Firstly, the motor of your dishwasher may be blocked and this is usually due to the filter being dirty or foreign objects being in it. Another common cause is a clogged drainage system, as this can prevent water from draining properly. You have nothing to worry about, we're here to help you solve this problem.

How to fix Aeg dishwasher error i40?

Fortunately, there are several simple solutions for fixing the i40 error code. Here are some things you can try before calling for technical support. Don't be afraid and try it yourself:

1. Clean the dishwasher filter: Make sure there are no foreign objects stuck. This should fix not only the i40 error but also improve the overall performance of your dishwasher.
2. Check the drainage system: Try unclogging it using a hose to vacuum the air. You can also check the water protection to make sure it's installed correctly.
3. If none of this works, you can try adjusting the drainage valve: Try adjusting it to make sure it's allowing the correct amount of air to flow into the washing drum.
4. Finally, if none of the above has worked, then it's possible that the problem is an electrical issue: If this is the case, it's best to refer to the manufacturer's instructions to find an appropriate solution.
5. If the problem persists, you can try resetting your dishwasher: Press the power button for about 3 to 5 seconds. Or alternatively, disconnect your dishwasher from the electrical connection and wait about 30 seconds, reconnect, and this will reset your dishwasher system.
6. Repeat all the steps if necessary: Check again all the aforementioned steps and make sure you've done everything correctly.
7. If you haven't been able to solve the problem on your own, then contact a qualified technician: Nothing better than a professional specialist to help you solve the problem with your appliance. Go to a specialized technical service for AEG dishwashers.