Select your language

Aeg Dishwasher Error e10

error e10 dishwasher aeg

What is the fault of the e10 Aeg error that is affecting your dishwasher?

The e10 error in AEG dishwashers is a common issue that these devices tend to have. Generally, it occurs when there is a problem with the water inlet, which causes the dishwasher motor to operate with difficulty. Water may reach the pressure chamber erratically or not at all, causing the washing machine to fail.

If you have this type of error on your machine, then you are in the right place. We will explain the possible causes that can lead to this error code on your AEG dishwasher and also the solutions so that you can resolve this issue yourself.

There are several reasons why the e10 error occurs in AEG dishwashers. Some of them include:

  • A problem with the water inlet: This can occur due to incorrect installation of the water line, or due to clogs of mud or dirt in the water inlet pipes.
  • Water pressure too low: This could happen if the water line is not wide enough or the faucet nose does not have enough pressure.
  • A blockage in the dishwasher's water inlet filter: If the filter is dirty or clogged, water will not flow enough to feed the dishwasher motor.
  • A faulty control valve: The valve controls the amount of water that enters the dishwasher. If it is not working properly, water will not reach the motor.

How to solve the error e10 of Aeg dishwasher?

We know you want to keep using your appliance! If your AEG dishwasher is showing the e10 error code, there are a few things you can do to troubleshoot the problem:

  1. Check water parameters: Make sure the water pressure is adequate for the dishwasher. If you need to adjust the water pressure, contact your local water provider.
  2. Check the control valve: If the valve is not functioning properly, it will need to be replaced.
  3. Clean the water inlet filter: If it is dirty or clogged, you can clean it to fix the problem.
  4. Check the flow meter: This part controls the amount of water that enters the dishwasher, and if it is broken, it will need to be replaced.
  5. Adjust the water pressure valve: If it is misaligned, you will need to perform maintenance and readjust it properly to solve the problem.
  6. You can repeat all the steps: In case the problem persists, make sure you have followed all the steps exactly. Or you can also call an AEG dishwasher specialist technician to help you troubleshoot the problem.

¿Te ha servido este artículo? Por favor déjanos tu Voto