Select your language

Aeg Dishwasher Error e60

error e60 dishwasher aeg

What is the fault of the e60 Aeg error that is affecting your dishwasher?

Have you noticed an e60 error code on your AEG dishwasher panel? If so, you're probably wondering what it means and how to fix it. In this article, we'll explain what the e60 error code on AEG dishwashers means and how you can resolve this issue so you can continue using your appliance.

The e60 error code means that the dishwasher is experiencing problems with pumping water. The e60 error appears when the motors of the dishwasher pump are not functioning properly. This can be due to several reasons.

The most common cause of the e60 error is a clogged filter: This can cause the draining pump motor to overheat, leading to an electrical issue. The filter is usually located near the bottom of the dishwasher. Therefore, we recommend checking and cleaning the filter to see if the error disappears.

The second most common cause of the e60 error is a problem with the pump timer: This may be due to a blocked or damaged pressure switch. The pressure switch is located inside the pump, so you would need to replace it to fix the problem.

The third most common cause of the e60 error is a problem with a capacitor in the pump: This can cause an overload on the draining pump motor. To detect this problem, you would need to disassemble the pump and check the capacitor.

In addition to problems with the pump motors, problems with the control board of the AEG dishwasher can also occur. This may be due to a defect or a short circuit on the board. If the board is damaged, you'll need to replace it to resolve the problem.

How to fix Aeg dishwasher error e60?

Ultimately, there are several possible solutions to the e60 error code. Below, we'll show you some of them:

  1. First, reset your AEG dishwasher: You can do this by pressing the power button for about 4 to 5 seconds. After this, your dishwasher will reset, and check if the error persists.
  2. Check the dishwasher filter to see if it's blocked or dirty. If so, you'll need to perform maintenance or replace it if necessary.
  3. If the filter is clean, then check the pump: Check the pressure switch to see if it's damaged or blocked. If so, you'll need to replace it with a new one.
  4. Disassemble the pump and check the capacitor: If this electrical component is in poor operating condition, the pump will not function correctly.
  5. Check the control board: If it's damaged, it will need to be replaced.
  6. Consult with a qualified technician: If the problem persists, you'll need to consult a specialist technician in AEG dishwashers to help you solve this problem.

We know that the use of this appliance is important for your home. We hope this information has helped you understand and solve the e60 error in your AEG dishwasher.

¿Te ha servido este artículo? Por favor déjanos tu Voto