Select your language

Aeg Dishwasher Error 50

error 50 dishwasher aeg

What is the fault of the error 50 Aeg that is affecting your dishwasher?

Has your AEG dishwasher recently displayed the error 50? We're here to help you decode the mysterious error codes that appear on our beloved appliances. Please note that this type of error 50 also includes the i50 error code, so the causes and solutions are exactly the same for both issues. So without further ado, let's get to it!

Understanding the AEG dishwashers problems with your dishwasher will give you the opportunity to identify any problems that may arise in the future. Why does your AEG dishwasher display the error 50? The error code 50 means that there is a short circuit in the control system. This can come from a problem with the circuit board or device and even an electrical problem. A short is simply an unexpected electrical connection between two circuits, which is detected by the control system. This means that the electrical circuit of your device is behaving unexpectedly.

These may be the possible causes and reasons why this error code 50 may appear on your AEG dishwasher:

  • The circuit of the internal circuit board is faulty.
  • A failure in the printed circuit board controller.
  • A faulty electrical connection between circuits.
  • An unexpected electrical condition.
  • Worn, broken, or expired cables.
  • Blown fuses that need immediate replacement.

How to fix Aeg dishwasher error 50?

If your AEG dishwasher has this error code 50 in its control system, these are the possible solutions that you can apply to continue using your appliance normally:

  1. Turn off your dishwasher through the control panel: This is to reset its system and have all sensors restart.
  2. Disconnect the power supply from your dishwasher: We do this for 2 reasons. The first is to completely reset the entire system of your dishwasher. And the second is to properly cool down the device.
  3. Check the wiring: Make sure that the connectors of the circuit board are firmly connected and that the power cable is not crushed, burned or very twisted. Remember that the cables inside have compounds and alloys of copper and tin, so a sudden twist of these cables can make them "break" causing energy transmission to not flow correctly.
  4. Check the fuses: It is easy to check if a fuse is burned, you just have to remove it and if the metal plate inside is broken, then it needs an immediate replacement.
  5. Turn on the washer and if the problem persists: Then repeat all the steps, double-check everything you have previously checked and make sure everything is fine.
  6. If the error code 50 in your AEG dishwasher still refuses to disappear from your machine: Then maybe it's time to contact the manufacturer or seek the help of a qualified technician in this type of appliances.

¿Te ha servido este artículo? Por favor déjanos tu Voto