Aeg Dryer Error e50

What is the fault of the error e50 Aeg that is affecting your dryer?

El error e50 in AEG dryers is a common problem that can have serious consequences if not resolved correctly. This error is often the result of a failure in the electrical circuit, sensors in the dryer have failed, some internal part is blocked, there is electromagnetic interference in the vicinity of the dryer, etc.

Before continuing, it is important that you know that a technical error can be a big problem. Always make sure to follow the correct steps to fix it and, more importantly, stop using the dryer immediately if it shows an error code.

As for the possible causes of the e50 error, here are some that can give you an idea of the problem in the dryer:

• The electrical input current is too low. This may be due to the load connected to the dryer, the length of the power line, faulty fuses, etc.
• The power cable is broken inside, twisted, or bent: Check that the power cable is connected correctly.
• The sensors inside the dryer may be damaged or not functioning correctly.
• There is a short circuit in the cables or in some internal component.
• The interior filter is clogged.

How to solve the error e50 of Aeg dryer?

Now, here are some possible solutions if your AEG dryer shows the e50 error code:

1. Make sure all power cables are properly connected and that the input power is sufficient to turn on the dryer.
2. Restart the dryer: Disconnect it from the power outlet, wait a few minutes, and reconnect it. This will reset the system of your dryer, including the sensors that control the temperature and the flow of electrical current.
3. Check the filter: It should be cleaned regularly to prevent blockage. Make sure to add the cleaning of this filter to your regular and periodic maintenance of your AEG dryer.
4. Disconnect other electrical appliances: Only those connected to the same power outlet. This is to see if there is any electromagnetic interference. We recommend that the dryer be connected to a separate electrical outlet just for it and through a voltage regulator or surge protector for appliances.
5. Repeat all the previous steps: In case the problem persists, you can repeat all the steps mentioned above to make sure you have followed everything correctly.
6. If the problem persists: Seek assistance from a qualified AEG technician to help you resolve this e50 error code in your AEG dryer.

If your AEG dryer shows the e50 error code on its LED display, you must take immediate action to resolve it. Technical errors can be very serious, but if you follow the steps mentioned above, you can solve the problem without complications. Don't be afraid to try to solve the problem yourself, remember that you can always count on the support of AEG's technical support to help you find a solution to your problem.