Select your language

Aeg Dryer Error e5e

error e5e dryer aeg

What is the fault of the error e5e Aeg that is affecting your dryer?

E5E is a communication error in the control board of many AEG dryers. It can sometimes be caused by errors in the electrical voltage or contact with water. We will explain the possible causes that can trigger this error and give you some tips on how to fix it.

AEG dryers are very popular for their durability and high performance. But sometimes users face the AEG drying machine error codes, which can be very frustrating to solve. Below we will explain why this error can occur, as well as some possible solutions that can help you fix the problem you have with your appliance.

Here are the possible causes of the e5e error code:

  • Excessive vibration: If the machine has been exposed to strong vibrations as if it were located on an unstable or vibrating surface, it is possible that the dryer will suffer damage to the control board. This can cause a communication error and trigger the e5e error.
  • Unstable electrical voltage: Washing and drying machines can be very sensitive to sudden changes in voltage. If the power line is affected by unexpected changes, it is possible that the control board of the dryer may be affected.
  • Liquid and/or moisture damage: If the machine has had any exposure to liquids or moisture, it is possible that this has caused some internal damage to the control board and of course, this can cause the e5e error code to appear on your precious appliance.

How to solve the error e5e of Aeg dryer?

Fortunately, all is not lost. Here are some possible solutions you can try with your dryer before calling a specialized technician:

  1. Turn off and turn on the dryer: This may help reset the control board. If the error persists, please disconnect the dryer from the power outlet for a few minutes, then reconnect it and try to turn it on again.
  2. Check the electrical voltage: Make sure there are no unexpected voltage variations. Check the electrical outlet, and if possible, use a special voltage regulator for appliances or surge protector to connect your dryer.
  3. Check the electrical cable of your dryer: This cable should not be broken, bent excessively, twisted, or crushed. The wires inside are made of copper, and this can break due to excessive bending.
  4. Clean the inside of your dryer: Use a dry cloth to clean the inside of the dryer. Be sure to remove any residue of liquid and dirt that may have been left inside the dryer.
  5. Check the control board (PCB): If you suspect that the control board may have been exposed to moisture, then you will need to check it. You can use an electronic cleaner to remove moisture residue on the board and its connectors.
  6. Repeat all steps if necessary: Follow all the steps to the letter, and if the problem persists, try everything again to make sure you have done everything correctly.
  7. Contact an authorized technician: If the problem persists, it's best to have a qualified AEG technician check your dryer to find the cause and offer an effective solution to resolve the e5e error code.

¿Te ha servido este artículo? Por favor déjanos tu Voto