Aeg Dryer Error e60

What is the fault of the error e60 Aeg that is affecting your dryer?

Have you recently experienced the e60 error code on your AEG dryer and don't know what to do? This is a problem that many people have experienced. It occurs when the dryer won't stop heating up. When this happens, it usually displays the e60 error code on its LED screen.

Don't worry, there are ways to fix this. However, it's important to identify the cause of the error first. For this reason, I'll explain the possible causes and solutions of this e60 error here.

There are some possible causes that could lead to this error, such as:

• A defective heating element: Your dryer has a heating element with two internal coils; one heats up to dry the clothes and the other regulates the temperature. If one of these coils has an issue, it could cause the e60 error.
• A defective heating valve: It's possible that the heating valve isn't opening correctly, which prevents hot air from entering the dryer.
• A defective thermal sensor: This is due to an internal resistor that detects the temperature in the dryer and sends a signal to the control panel. If there's an issue with this resistor, it could cause the e60 error.
• A defective fan: The internal fan of the dryer must be functioning properly for the temperature to normalize. If this fan starts to fail, the temperature of your dryer will start to rise significantly especially with continuous use.

How to solve the error e60 of Aeg dryer?

You have nothing to worry about. Here are some possible solutions you can try to fix this problem yourself:

1. Place your AEG dryer in a ventilated area: Make sure to place your AEG dryer in a ventilated and cool area. This will help to reduce its operating temperature.
2. Restart your AEG dryer: You can do this by turning it off and unplugging it from the power outlet for a few minutes. Plug it back in and try again. This procedure resets the system and also forces all the sensors of your AEG dryer to restart.
3. Check the resistance: Check the resistance to see if it has any issues. If you detect any problems, try to replace it.
4. Check the heating valve: If there is an issue with the heating valve, try cleaning it with a soft cloth to remove any dust and debris.
5. Check the thermal sensor: The resistance may also be faulty. If so, try replacing it with a new sensor.
6. Check the fan: The internal fan may be faulty. To identify the problem, check if the fan is rotating correctly.
7. Restart your drying cycle: This can solve the e60 error. Try restarting the drying cycle and check if the problem has been resolved.
8. Repeat all the steps: If the problem persists, try repeating all the previous steps.
9. Seek assistance from a qualified AEG technician: If the problem persists, seek assistance from a qualified AEG technician to fix the e60 error.