Aeg Dryer Error e54

What is the fault of the error e54 Aeg that is affecting your dryer?

Are you experiencing the frustrating e54 error code on your AEG dryer? If so, you've come to the right place because we want to help you solve it. We'll take a look at the AEG e54 error, including its possible causes and solutions.

What could have caused this inconvenience? Well, there are several factors that contribute to the appearance of the e54 error on your AEG dryer, such as a motor relay failure, a defective control board (PCB), electrical current leaks, among others.

Below, we list the main factors that contribute to the appearance of the e54 error code:

• Defective motor relays: Motor relays are an electrical on-off device. These parts are used to control the speed and temperature of the dryer. If they start to fail, it is very common for the e54 error code to appear.
• Damaged control board: The PCB is the control board that manages everything that happens with your dryer and for obvious reasons plays a fundamental role in the correct operation of the dryer. If any electrical component of the board is damaged, it is very likely that the e54 error code will appear.
• Electrical current leak: This happens when the electrical energy is not distributed correctly and there are electrical leaks. This can not only cause the e54 error code to appear, but also other problems such as overheating in your appliance.

How to solve the error e54 of Aeg dryer?

Now, having described the main factors that contribute to the appearance of the e54 error code in AEG dryers, we will list possible solutions:

1. Turn off your dryer and turn it back on: This step may seem a bit obvious, but by doing this, you are restarting all the systems on the control board. Give it a try!
2. Disconnect your dryer from the electrical outlet: Disconnect it for a few minutes and then reconnect it. This helps the control board (PCB) to restart completely, including all its sensors.
3. If the electrical outlet is shared: Disconnect other devices that are connected to the same electrical outlet as your dryer. We recommend using a special voltage regulator for appliances and connecting your dryer alone to this outlet while you resolve this problem.
4. Check the motor relays: If the problem is a faulty relay, it is recommended to disconnect the motor to check for electrical shorts. If you find any, it is recommended to purchase a new relay to replace the old one.
5. Check the connectors on the PCB: The problem could be a defect in the signal that travels from the connectors to the control board (PCB). The solution is to check if the contacts are oxidized. You can use an electronic cleaner to perform this cleaning.
6. Repeat the previous steps: If you have followed all the steps to solve the e54 error and the problem persists, we recommend repeating the steps once again to make sure you have followed everything correctly.
7. Seek help from a qualified AEG technician: If the previous steps have not solved the problem, it is recommended to seek help from a qualified AEG technician to safely and effectively repair your dryer.