Select your language

Aeg Washer Error e73

error e73 washer aeg

What is the fault of the e73 Aeg error that is affecting your washing machine?

Have you ever encountered the error code "e73" on your AEG washing machine? If so, then you know how frustrating it can be to decipher and, above all, solve this problem. First of all, don't despair, as it's not as serious of an issue as you might think.

To help you with this situation, we have prepared a series of tips and advice so that you can identify this error and solve it without any major problems.

What is the "e73" error code on your AEG washing machine? Starting with the basics: The "e73" error code is one of the errors on AEG washing machines occurs when the system detects an interior temperature of the machine that is too high for safe and predetermined parameters. This means that the temperature recorded inside your AEG washing machine is higher than normal.

Although an excessively high temperature inside the washing machine is most likely the cause of an e73 error, it is not the only one. There are other possible causes of the error:

  • The presence of a short circuit in the washing machine's electrical system.
  • The presence of a faulty electrical element.
  • Internal overheating due to lack of ventilation of the machine.
  • A failure in the washing machine's temperature circuit.

How to solve the error e73 of Aeg washing machine?

It's time to find a solution to the problem. Here are some ideas to solve this error:

  1. Check the electrical network: You should check that the electrical network has been connected correctly and that there are no voltage spikes or risk of overvoltage. Preferably connect your washing machine to a power outlet only for it and using a voltage regulator or surge protector.
  2. Disconnect your AEG washing machine: for about 20 minutes and then reconnect. This is to restart all its systems. If the error persists, move on to the following tips.
  3. Check the electrical elements: You should check the electrical elements of the washing machine for any damage.
  4. Make sure you have adequate ventilation: Keep in mind that the machine also needs a good amount of fresh air to function properly without the risk of overheating. Do not cover the air outlets or ventilation grilles if it has them.
  5. Check the water temperature: In addition to this, you should also check the temperature circuit of your washing machine and the thermostat to ensure that it is functioning properly.
  6. If after following all these steps the problem persists, you can try them again to make sure you haven't skipped something important. If the error continues, you can seek help from a qualified technician in AEG washing machines to help you resolve this inconvenience.

¿Te ha servido este artículo? Por favor déjanos tu Voto