Select your language

Aeg washer Error e91

error e91 washer aeg

What is the fault of the e91 Aeg error that is affecting your washing machine?

Do you have an AEG washing machine problems with the error code "e91"? This is a common problem among users of this type of device, but there is nothing to worry about. In this article, we will explain in a clear and simple way what the e91 error is in AEG washing machines and what its causes and solutions are.

First of all, the e91 code refers to an electrical problem. The failure occurs when a lack of power or communication problems between the electronic boards of your washing machine are detected. These are the possible causes why this error may occur in your washing machine:

  • The power cable is broken: In this case, you need to replace it with a new one to solve the problem.
  • The grounding socket is in poor condition: This means that the electricity output is not adequate and can cause a short circuit.
  • The washing machine has been disconnected from the power line: Check that the electrical wiring of your washing machine to the power socket is in good condition. Sometimes pets tend to bite this cable.
  • Your washing machine is being affected by a power surge: A power surge is a voltage spike in the power line that can cause serious damage to the washing machine.

How to solve the error e91 of Aeg washing machine?

And since it's time to find a solution to the problem. Let's see what kind of solutions we can apply:

  1. It may seem obvious, but if the washing machine has been disconnected from the power line, reconnect it.
  2. Check that the power outlet is properly connected: Make sure there are no short circuits in the power line, you may need to call an electrician for this. You can also try moving your washing machine to a different power outlet than the one you usually use.
  3. Check the power cable and grounding: Make sure all components are in good condition and there is no damage caused by time or use. Some pets like rodents or rabbits tend to bite the power cables of various appliances.
  4. Install a surge protector or voltage regulator: This will help protect your washing machine from voltage spikes. The electricity that reaches your washing machine should be as stable as possible. If possible, use a power outlet that is exclusively for your washing machine.
  5. If you have tried all these steps and the problem persists, try again to review that everything is okay. Otherwise, seek help from a qualified technician to help you resolve the problem with your AEG washing machine.

¿Te ha servido este artículo? Por favor déjanos tu Voto