If your AEG washing machine is displaying error codes on its screen, here you will find a useful list to help you identify and resolve the issue. These error codes are indicators that provide you with information about possible faults in your washing machine. From issues related to the load to errors in the drainage system or even malfunctions in the electronic components. This list will provide you with the necessary information to address each situation.
Bottom Below, you will find a table with the complete list of error codes for AEG washing machines along with their possible associated problems. Use next table as a reference to identify any issues you may encounter with your washing machine. To access the detailed article, use the above list.
These are the main problems according to the error number:
We have a problem with the water entering due to some object that is obstructing its path.
There is a problem with the washing machine door. The root of the problem is varied.
As a general rule there is a problem with the door lock of the washing machine. Although, like the previous case, there may be more causes that are related to the door.
We have a problem in the heating system that shows that the washing machine is not getting as hot as it should during the wash cycle. There are several reasons why this may be happening.
The water has lost pressure. Mainly it is the bomb, but there are more cases that you should review.
We have a drainage problem. The cause can be varied: clogged tube, dirty filter, etc.
The washing machine does not drain well during its washing process. Mainly it can be due to blockages in the filter or in the drain pipe.
Your washing machine does not drain properly and it could be due to multiple problems.
We have a problem with the door closure. The sensor that indicates that it is closed may fail and not allow the washing machine to operate because it believes that the door is open.
The washing machine thinks it is full of water should be turned off to avoid further damage.
There is a safety lock for some major problem that can leave the washing machine damaged or irreparable.
It is detected that the temperature is too high. The root of the problem is varied but always related to some electronic part.
We have a problem with the water supply or with the pump where it sends dirty water to the washing machine. The causes may be other as well.
Here we generally have an electrical problem. Most of the time it is related to the electronic board, so it will be one of the most expensive failures to solve due to the cost and risk assumed.
This error is the most common and indicates that not enough liquid is received to complete the wash cycle. The root of the problem can be very varied.
The washing machine will emit 15 beeps indicating a general problem that can be very varied: open door, broken door rubber, dirty filter, etc.
It tells us that the washing machine is not being loaded with enough water and the cause may be a failure in the pipe connection, the water pressure or the water supply.