Select your language

Aeg Washer Error e10

error e10 washer aeg

What is the fault of the e10 Aeg error that is affecting your washing machine?

AEG washing machines may not function properly due to the "e10" error, sometimes known as a condensation error. This type of error usually occurs when there is a lack of water pressure or when there is a malfunction in the pumping system of the machine.

We will explain in detail the e10 code and its causes, followed by some possible solutions that will provide an effective solution.

This e10 error of the AEG washing machine indicates a condensation failure in the system. This often happens due to insufficient water pressure in the water supply, a failure in the machine's pumping system, or when too much water accumulates inside the machine.

E10 errors can be caused by several reasons: they will occur when the water supply is not strong or constant enough, or when the water inlet hose is blocked or damaged. It can also happen when the machine's pumping system is not working properly, the filter is clogged, or the condensation sensor is not properly calibrated.

How to solve the error e10 of Aeg washing machine?

If your washing machine is indicating error code E10, there are some simple solutions that can be tried to fix the problem:

  1. Check water supply: If the water supply is not strong and constant enough, the condensation system will not work properly. Make sure the water supply is strong enough, avoiding obstructions in the water line path.
  2. Inspect hose: If the inlet hose to the washing machine is blocked or damaged, the water supply will not reach your appliance properly.
  3. Check pumping system: If the pumping system of the machine is not working properly, the e10 error can appear.
  4. Inspect filter: If there is any obstruction or dirt in the machine filter, the condensation system will also not work properly. Check the machine filter and clean it if necessary.
  5. Calibrate the condensation sensor: Sometimes, the e10 error occurs because the condensation sensor is misaligned. Connect the cable securely to calibrate the sensor and fix the error.

¿Te ha servido este artículo? Por favor déjanos tu Voto