Aeg Washer Error ef4

What is the fault of the ef4 Aeg error that is affecting your washing machine?

¡The error code "ef4" on the AEG washing machine is a common problem among users of this brand of washing machines! This error on your AEG washing machine refers to a fault in the connection of the pipe, water pressure, or water supply to your washing machine, which means that your washing machine will not fill with water due to the limited amount that reaches the tank.

There are several possible causes that can contribute to the appearance of the ef4 error. Here are some of the reasons:

• Your washing machine has a clogged water filter: This means that the water flow is interrupted through the water inlet valve.
• The water supply or its pressure is not at the proper level: This means that the pressure is not enough to properly fill the washing machine drum.
• There is a blockage in the water supply system: This means that there are some obstacles in the pipe system that prevent the delivery of enough water to fill the washing machine drum.
• Foam is your enemy: If you are using too much soap, this could be a problem for you.

How to solve the Aeg washing machine error ef4?

Now, how to fix the ef4 error on the AEG washing machine? Below is a list of some possible solutions. Try them all without fear, as none of them are invasive and will not damage your machine:

1. Restart your washing machine system: You can do this by unplugging it from the electrical outlet, waiting for about 5 minutes, and plugging it back in.
2. Don't use too much soap: Soap generates foam that can interfere with the washing machine sensors and generate a false positive error. You will have to wait for the excess foam to dissipate before using your washing machine again and checking its operation.
3. Check the water filter: You must detect if there is any obstruction that could slow down the water flow. If the filter is dirty, you have to do the respective maintenance and clean it.
4. Check that the water supply is appropriate: Make sure that the water supply is set at the optimal level for your washing machine drum.
5. Check the water supply system: Make sure the pipes are free for the water to pass through, and it should enter the washing machine with good pressure.
6. Repeat all steps: If the problem persists, if necessary, then repeat all the steps and make sure to do everything correctly.
7. Consult a qualified technician: If the problem persists and you really can't find the solution, then look for a technician with the required skills to help you solve the problem with your washing machine.