Aeg Washer Machine Error e41

What is the fault of the e41 Aeg error that is affecting your washing machine?

Do you have the error code "e41" on your AEG washing machine? Is your machine not functioning as it should? Well, there is a solution to this. The most important thing is that you don't have to despair! This error has an easy solution. Remember that we're here to help, so without further ado, let's get to it!

The e41 error indicates a problem with the door lock of your AEG washing machine. This is because the magnetic locks of the door can give an erroneous signal to the controller, indicating that the door is not closed even when it is. This can be quite annoying as your washing machine won't start the washing process until the door is in the correct position.

But you don't have much to worry about, this error is easy and simple to resolve and we're going to present you with some possible solutions. Below, we share some tips and advice for fixing this error and thus being able to use your precious appliance again.

How to solve the error e41 of Aeg washing machine?

If your AEG washing machine is displaying error code "e41", we present you with some of the possible solutions to this problem:

1. Disconnect the washing machine: A quick and simple way to solve the problem is to unplug the washing machine from the power outlet. This will be the first option when trying to solve any error code.
2. Check your washing machine's door: Check to see if there is any clothing or object blocking the door from closing properly.
3. Check the door seal: Make sure it is not worn or cracked. This seal can expire and become damaged over time.
4. Align the door correctly: To allow for proper closure, make sure the door is properly aligned and closed.
5. Clean the magnetic locks: If the machine still does not react, proceed to clean the magnetic locks on the door. Use a dry cloth to remove any dirt and press up and down.
6. Replace damaged magnetic locks: If the machine's magnetic locks are dirty or damaged, you will need to replace them to solve the problem.
7. Check the electrical connection and wiring: If the door closes properly but the error persists, then you will need to check the electrical connections and wiring. If none of this helps, then it could be a problem with the controller.
8. If none of these solutions work: It is possible that the door is faulty and needs to be replaced. We recommend calling a specialized technician to fix this for you.