Aeg Washer Error 43

What is the 43 Aeg error problem that is affecting your washing machine?

Are you facing error 43 in your AEG washing machine? This information will help you better understand the problem and the available solutions to fix the situation. The first thing you need to know is that this AEG washer error is quite common and super easy to fix, so you have nothing to worry about.

Why error 43 in an AEG washing machine? This error is the result of problems with the washing machine door. Most of the time, the error is associated with the door lock. Until you can solve this detail, you won't be able to continue using your washing machine normally.

Some causes that can cause this type of error in your washing machine may be:

• Expired, broken, or cracked door gasket.
• Defective locking mechanisms.
• Descaled or misconfigured sensors due to electrical overvoltage.
• Objects obstructing the closure of your door.
• Broken springs and/or hinges causing the door not to close properly because it does so unevenly.

Without further ado, let's show you the possible solutions that can help you fix the error code 43 on your AEG washing machine.

How to solve Aeg washing machine error 43?

There are several solutions to this problem, here we list the most common ones:

1. Restart your washing machine: You can do this by unplugging it from the electrical outlet, then wait for about 2 minutes and plug it back in. This will properly reset all the systems that control your washing machine, including the door sensors.
2. Check the mechanical parts that control the door: Such as the springs and hinges, that they are in good operating condition.
3. Check the door gasket of the washing machine: This is the gasket that seals the outside with the inside of your washing machine, it is located on the door. If this gasket is cracked, broken or worn out, then you will have to replace it.
4. Make sure that nothing is blocking the door from closing: There are times when clothing items interfere with the closing of the door of your washing machine. Check carefully that nothing is blocking the closure of the door.
5. Repeat the steps if the problem persists: In case the error 43 is still present on your washing machine, you can repeat the steps mentioned above, making sure you have followed everything exactly as we have indicated.
6. Consult a qualified technician and expert in AEG washing machines: If you have tried everything and the problem persists, it would be best to consult the experts. Contact AEG customer support and verify where you could find a technician near your area who can help you resolve this situation.